• 3/4" x 3/4"
• 1/8" FPT Port
• Brass/Tin or Cadium
  Plated

Part No. PPEC702

• 3/4" x 1/4" NPT
• 1/8" FPT Port
• Brass/Tin or Cadium
  Plated

Part No. PPEC704

• Brass/Tin or Cadium
  Plated

• Brass/Tin or Cadium
  Plated

• 1/8" NPT
• Brass/Tin or Cadium
  Plated

Part No. PPEC501

• 1/8" NPT
• Brass/Tin or Cadium
  Plated

Part No. PPEC401

• 1/8" NPT
• Brass

Part No. PPEC403

Wooden-handled mandrel designed for inserting into the PPEC701 Air Pipe to shape the bore so it will accept the various fittings withoug having to remove the aluminum lining of the pipe.

Part No. P01603

• Designed for use at pressure reading points, bypasses or air inlets on any 3/4" diameter or longer cable.
• 1/8" FPT Port

Part No. PPEC426A

• 3/8" O.D. fittings
• Brass/Tin or Cadium
  Plated

Provides a convenient means for connecting plastic tubing to each cable and the PPEC701 Air Pipe.

• 3/8" O.D. fittings
• Brass/Tin or Cadium
  Plated

Equipped with a shut-off valve used for constructing a by-pass across a pressure plug using 3/8" O.D. plastic tubing.

Part No. PPEC725

• 3/8" O.D. fittings
• 1/4" FPT Input
• Brass/Tin or Cadium
  Plated

Includes individual shut-off valves, pressure testing valves and tubing connections for 5 cables. Used to connect cables to PPEC701 Air Pipe. An additional pressure testing valve is provided for reading manifold pressure.

Part No. PPEC723

• 1/8" FPT Port
• 1/8" NPT connector
• Brass/Tin or Cadium
  Plated

Designed for installation between Air Pipe and the manifold assembly to protect cable pressures when breakage or other damage to the feeder pipe threatens loss of pressure.

Part No. PPEC724A

Designed to move gas from a pressure testing regulator to an inlet valve.

• Snap-on chuck to 1/4" coupling

Used as a pneumatic jumper between the pipe valve and cable valve to provide a buffering pressure source to a cable during splicing activity.

• Screw type chuck
• 5' long

Part No. PPEC729

• Same as PPEC729 but includes: 6 tags and ties

Part No. PPEC730