P8400W Series

P8400W Series Air Dryers

Up to 8400 SCFD

NEBS Compliant
Standard Features:
  • Dual, Independently Functioning Systems
  • Real-Time Monitroing of Over 15 Points
  • Digital Display of All Operating Parameters
  • Remote Access and Alarm Reset Capabilities
  • Accurate Humidity Sensing within ±0.1% RH
  • Ultra Quiet Compressors
  • Removable Compressor Tray for Ease of Maintenance
  • 8,000 Hour Maintenance Interval
Accessories:
  • Installation Kit (P011752)
  • 6-Month Maintenance Kit (P011766)
  • 8,000 Hour Maintenance Kit (P011813)
  • Cycle Module Interface (PVDW34)
  • 1/2” Tubing (PPEC430 - sold per foot)
  • 3/4” Hose (P07490 - sold per foot)
General Specifications:
P8402W
Output Capacity
(Both Systems / Single System)
Normal: 6,500 SCFD (184.1 SCMD) / 3,250 SCFD (92.1 SCMD) Continuous
Maximum: 8,400 SCFD (238 SCMD) / 4,200 SCFD (119 SCMD) Emergency
Power Requirements
(30 Amp Service Recommended)
220 - 230 VAC, 1-Phase, 50/60 Hz
Running Amps 15 Amps
Outlet Pressure Range 0 - 15 PSIG (0 - 103.4 KPa)
Outlet Air Relative Humidity Less than 2% RH - Less than -40°F/C Dew Point
Compressor Type Two-Cylinder, 3/4 HP, Oil-less Piston Type
Dehydrating Method Heatless Desiccant
Environment Operatating Temperature Range 40° - 85°F (5° - 30°C) Ambient
*Unit will go into SHUTDOWN Mode if Cabinet Temperature exceeds 120°F (49°C)
Noise Level 78.8 dBA at 10’ (3 m)
Heat Dissipation 6,000 BTU/hr
Alarms Complete readings of all critical measurement points, individual alarm indication display, including SNMP Communication and 2 Common Alarm Points
Outlet Connections 1/2” NPT Female
Dimensions 21” D x 25.25” W x 49” H (53.3 cm D x 64.1 cm W x 124.5 cm H)
Weight 265 lbs (120 kgs)
Literature:

P8400W Series Specification Sheet
P8400W Series User's Guide
Firmware Files:
*This is the latest production Firmware for our current version Control Boards ONLY.
Please Contact Altec AIR for all other Product Firmware requirements.

P8400W Series Firmware Files